Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Mold shrinkage rate | | ASTM D-955 | 0.4-0.6 % |
| other | Test Condition | Test Method | Test Result |
|---|
| | | 撞击性高 |
| Basic performance | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ASTM D-1238 | 32 g/10min |
| density | | ASTM D-792 | 1.04 g/cm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTM D785 | 113 |
| Flexural modulus | | ASTM D790/ISO 178 | 2350 kg/cm²(MPa)[Lb/in²] |
| bending strength | | ASTM D790/ISO 178 | 67 kg/cm²(MPa)[Lb/in²] |
| tensile strength | | ASTM D-638 | 47 Mpa |
| elongation at break | | ASTM D-638 | 20 % |
| Flexural modulus | | ASTM D-790 | 2250 Mpa |
| bending strength | | ASTM D-790 | 62 Mpa |
| IZOD notch impact strength | | ASTM D-256 | 294 J/m |
| IZOD notch impact strength | | ASTM D-256 | 127 J/m |
| Rockwell hardness | | ASTM D-785 | 113 R-Scale |
| Physical properties | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792/ISO 1183 | 1.04 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Combustibility (rate) | | UL94 | HB |
| | ASTM D-648 | 85 °C |
| vicat | | ASTM D-1525 | 105 °C |
| Ball indentation temperature | | | 90 °C |
| UL flame retardant rating | | UL94 | HB calss |
| mold temperature | | | 200-260 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare