PA6 B40SK LANXESS GERMANY

Form：Granules | Grade：Injection grade

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Certificates

Technical Data Sheet

other	Test Condition	Test Method	Test Result	Test Unit
characteristic			注射级.高粘度.高韧性.适用于承受重载的制品.脚轮用
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
bending strength		ASTM D790/ISO 178	115	kg/cm²(MPa)[Lb/in²]
Bending modulus		ASTM D790/ISO 178	2800	kg/cm²(MPa)[Lb/in²]
tensile strength		ASTM D638/ISO 527	55.90(屈服)	kg/cm²(MPa)[Lb/in²]
Tensile modulus		ASTM D638/ISO 527	3200	kg/cm²(MPa)[Lb/in²]
Impact strength of cantilever beam gap		ASTM D256/ISO 179	<10	kg·cm/cm(J/M)ft·lb/in
	Impact strength of cantilever beam gap		ASTM D256/ISO 179	250	kg·cm/cm(J/M)ft·lb/in
	Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ASTM D256/ISO 179	NB	kg·cm/cm(J/M)ft·lb/in
Charpy Notched Impact Strength		ASTM D256/ISO 179	<10	kg·cm/cm(J/M)ft·lb/in
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion		ASTM D696/ISO 11359	0.8	mm/mm.℃
Vicat softening temperature		ASTM D1525/ISO R306	-222	℃（℉）
Hot deformation temperature	HDT	ASTM D648/ISO 75	-55	℃（℉）
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate		ASTM D1238/ISO 1133	20	g/10min
Shrinkage rate		ASTM D955	1.0	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top