PC 201-8 STYRON US

Form：Granules | Grade：Transparent level

Properties:

heat-resistingtransparentHigh impact resistance

Typical Applications:

Bottle capcontainerNon specific foodUsage: Food containerPackaging productsSports equipment and baby bottles etc.

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Bottle cap \| container \| Non specific food \| Usage: Food container \| Packaging products \| Sports equipment and baby bottles \| etc.
Properties:	heat-resisting \| transparent \| High impact resistance

Certificates

No Data...

Technical Data Sheet

Other performance	Test Condition	Test Method	Test Result	Test Unit
Average degree of combustion		ASTM D-635	25	mm
Limiting Oxygen Index (LOI)		ASTM D-2863	26	%
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D-792	1200	kg/m
Water absorption rate	23℃，相对湿度50%，Equilibrium	ASTM D-570	0.32	%
Water absorption rate	Water absorption rate	24hr,23℃	ASTM D-570	0.15	%
melt mass-flow rate	300℃/1.2kg	ASTM D-1238	8	g/10min
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Dart impact	总能量@23℃	ASTM D-3763	89	J
Bending modulus		ASTM D-790	2410	Mpa
Tensile modulus		ASTM D-638	2410	Mpa
Impact strength of cantilever beam gap	23℃	ASTM D-256	未破裂
bending strength		ASTM D-790	96	Mpa
tensile strength	Yield点	ASTM D-638	60	Mpa
tensile strength	tensile strength	Break点	ASTM D-638	72	Mpa
Impact strength of cantilever beam gap	23℃	ASTM D-256	900	J/m
elongation	Yield点	ASTM D-638	6	%
elongation	elongation	Break点	ASTM D-638	150	%
Rockwell hardness		ASTM D-785	73	M标度
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	-40℃～82℃	ASTM D-696	68×10	mm/mm/℃
Ball indentation temperature		IEC 598-1	>125	°C
Vicat softening temperature		ASTM D-1525	149	°C
Glow wire combustion index (GWFI)	2mm	IEC 695-2-1	850	°C
Hot deformation temperature	Unannealed@1.82MPa(4mm)	ASTM D-648	129	°C
	Hot deformation temperature	Annealed@1.82MPa(4mm)	ASTM D-648	142	°C
	Hot deformation temperature	Hot deformation temperature	Annealed@0.45MPa(4mm)	ASTM D-648	145	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Transmittance rate		ASTM D-1003	89	%
Shrinkage rate		ASTM D-955	0.005-0.007	mm/mm
turbidity		ASTM D-1003	0.7-1.5	%
Refractive index		ASTM D-542	1.586
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity	23℃，干	ASTM D-257	2.0×10	Ω.cm
Dissipation factor	60Hz	ASTM D-150	0.001
Dielectric strength	60Hz	ASTM D-149	17	KV/mm
Compared to the Leakage Traceability Index (CTI)	2mm	IEC 112	250	V

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top