Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.41 g/cm³ |
| Water absorption rate | Saturation | ASTM D570 | <0.10 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore hardness | | ASTM D2240 | 86 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Wear factor | | 内部方法 | 2.46 |
| Space stability, shrinkage | | | 0.0 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| bending strength | | ASTM D790 | 205 MPa |
| Compression Modulus | | ASTM D695 | 2550 MPa |
| compressive strength | | ASTM D695 | 251 MPa |
| coefficient of friction | Itself - Dynamic | | 0.35 |
| Heat distortion temperature | | ASTM D621 | 0.200 % |
| elongation | Break | ASTM D638 | 6.5 % |
| Flexural modulus | | ASTM D790 | 3050 MPa |
| tensile strength | | ASTM D638 | 89.3 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D256 | 67 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | ASTM D257 | 1.0E+15到1.0E+16 ohms |
| Volume resistivity | | ASTM D257 | 1.0E+16到1.0E+17 ohms·cm |
| dielectric strength | | ASTM D149 | 23 kV/mm |
| dielectric constant | | ASTM D150 | 3.02 |
| dielectric constant | | ASTM D150 | 2.90 |
| Dissipation Factor | | ASTM D150 | 3E-03 |
| Dissipation Factor | | ASTM D150 | 1E-03 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Linear coefficient of thermal expansion | | ASTM D696 | 4.5E-05 cm/cm/°C |
| thermal conductivity | | ASTMC177 | 0.039 W/m/K |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare