TSU InnoTuf® HP-2150D
0
CompareTechnical Data Sheet
| thermosetting | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Demold Time | 240到360 min | ||
| Resin | 按重量计算的混合比:100按容量计算的混合比:100 | ||
| Hardener | 按重量计算的混合比:22按容量计算的混合比:20 |
| Uncured Properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| 0.60 Pa·s | |||
| 3.3 Pa·s | |||
| 1.7E+02 hr | |||
| 15到25 min | |||
| 7.1 Pa·s |
| Cured Properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Supporting hardness | ASTMD2240 | 45到55 | |
| tensile strength | ASTMD638 | 29.8 MPa | |
| elongation | Break | ASTMD638 | 280 % |
| tear strength | ASTMD624 | 73.6 kN/m |
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | Base Resin | 1.08 g/cm³ | |
| 1.09 g/cm³ | |||
| 1.18 g/cm³ | |||
| Shrinkage rate | ASTMD2566 | 0.40到0.80 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD4060 | 31.0 mg |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top