
PCTA BR001 EASTMAN USA
118
Form:Granules | Grade:Injection grade
Properties:
High mobilitytransparent
Typical Applications:
foodchip
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | food | chip |
| Properties: | High mobility | transparent |
Certificates
No Data...
Technical Data Sheet
| optical performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Transmittance rate | μm | ASTM D1003 | 89 | % |
| turbidity | ASTM D1003 | 0.30 | % | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Suspended wall beam without notch impact strength | -40°C | ASTM D256 | NB | J/m |
| 23°C | ASTM D256 | NB | J/m | |
| Impact strength of cantilever beam gap | -40°C | ASTM D256 | 40 | J/m |
| 23°C | ASTM D256 | 80 | J/m | |
| tensile strength | 23°C | ASTM D638 | 47 | Mpa |
| Bending modulus | 23°C | ASTM D790 | 2000 | Mpa |
| bending strength | 23°C | ASTM D790 | 69 | Mpa |
| Elongation at Break | 23°C | ASTM D638 | 5.00 | % |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 1.80MPaUnannealed | ASTM D648 | 65 | °C |
| 0.45MPaUnannealed | ASTM D648 | 73 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | TD | ASTM D995 | 0.60 | % |
| MD | ASTM D995 | 0.20 | % | |
| density | ASTM D792 | 1.20 | g/cm³ | |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Rockwell hardness | ASTM D785 | 103 | R |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.