LLDPE TOTAL Polyethylene Lumicene® M 2710 EP (EU)
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ISO 1133 | 0.90 g/10min | |
| density | ISO 1183 | 0.927 g/cm³ |
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| gloss | ASTM D2457 | 70 | |
| Haze ratio | ISO 14782 | 6.5 % |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| BlownFilmMeltTemperature | 180to260 °C |
| film | Test Condition | Test Method | Test Result |
|---|---|---|---|
| elongation | ISO 527-3 | 650 % | |
| ISO 527-3 | 720 % | ||
| Dart impact | ISO 7765-1 | 200 g | |
| film thickness | 40 µm | ||
| tensile strength | ISO 527-3 | 13.5 MPa | |
| ISO 527-3 | 14.0 MPa | ||
| ISO 527-3 | 51.0 MPa | ||
| ISO 527-3 | 48.0 MPa | ||
| Elmendorf tear strength | ISO 6383-2 | 60 N | |
| ISO 6383-2 | 160 N |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ISO 306 | 118 °C | |
| melting temperature | ISO 11357-3 | 119 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top