PEI+PCE ULTEM™ ATX3562R resin
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.69 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 20 g/10min | |
| Melt volume flow rate | ISO 1133 | 20.0 cm³/10min | |
| Shrinkage rate | 内部方法 | 0.20to0.30 % | |
| 内部方法 | 0.30to0.50 % | ||
| Water absorption rate | ISO 62 | 0.10 % | |
| ISO 62 | 0.040 % | ||
| density | ASTM D792 | 1.69 g/cm³ |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 14900 MPa | |
| ISO 527-2/1 | 14700 MPa | ||
| tensile strength | Yield | ASTM D638 | 125 MPa |
| Yield | ISO 527-2/5 | 121 MPa | |
| Break | ASTM D638 | 125 MPa | |
| Break | ISO 527-2/5 | 121 MPa | |
| elongation | Yield | ASTM D638 | 2.5 % |
| Tensile strain | Yield | ISO 527-2/5 | 1.4 % |
| elongation | Break | ASTM D638 | 2.5 % |
| Tensile strain | Break | ISO 527-2/5 | 1.4 % |
| Flexural modulus | ASTM D790 | 12900 MPa | |
| ISO 178 | 13600 MPa | ||
| bending strength | ISO 178 | 172 MPa | |
| ASTM D790 | 180 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 50 J/m | |
| ISO 180/1A | 5.4 kJ/m² | ||
| ISO 180/1A | 5.6 kJ/m² | ||
| Suspended wall beam without notch impact strength | ISO 180/1U | 5.6 kJ/m² | |
| Impact strength of cantilever beam gap | ASTM D256 | 110 J/m | |
| Dart impact | ASTM D3763 | 12.0 J | |
| Charpy Notched Impact Strength | ISO 179/1eA | 4.8 kJ/m² | |
| Impact strength of cantilever beam gap | ASTM D256 | 50 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | ASTM D257 | 2.1E+15 ohms | |
| Volume resistivity | ASTM D257 | 6E+15 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/Bf | 195 °C | |
| ASTM D648 | 183 °C | ||
| ISO 75-2/Af | 182 °C | ||
| vicat | ASTM D152510 | 184 °C | |
| ISO 306/B50 | 187 °C | ||
| ISO 306/B120 | 195 °C | ||
| ball-indentation hardness | IEC 60695-10-2 | Pass | |
| Linear coefficient of thermal expansion | ASTME831 | 1.6E-05 cm/cm/°C | |
| ISO 11359-2 | 1.6E-05 cm/cm/°C | ||
| ASTME831 | 3.8E-05 cm/cm/°C | ||
| ISO 11359-2 | 3.8E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top