TPX TPX™ RT18XB
123
- Properties:High temperature resistantransparent
- Usages:Medical packagingBottle cap
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melting point | MCI方法 | 240 °C | |
| melt mass-flow rate | ASTM D-1238 | 26 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Olsen rigidity | ASTM D-747 | 10,000 kg/cm | |
| Tensile yield strength | ASTM D-638 | 235 kg/cm | |
| tensile strength | ASTM D-638 | 175 kg/cm | |
| ROCKWELL hardness | ASTM D-785 | R85 | |
| Tortuous modulus | ASTM D-790 | 13,000 kg/cm | |
| elongation | ASTM D-638 | 25 % | |
| ASTM D-790 | 360 kg/cm | ||
| Charpy notch impact strength | ASTM D-256 | 5 kgcm/cm | |
| Non notched LZOD impact strength | ASTM D-256 | 15 kgcm/cm |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| refractive index | ASTM D-542 | 1.463 ND | |
| ambiguity | ASTM D-1746 | 1.5 % | |
| transmittance | ASTM D-1746 | 92 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| volume resistivity | ASTM D-257 | >10 Ωcm | |
| Water absorption rate | ASTM D-570 | 0.01 % | |
| dielectric strength | ASTM D-149 | 65 KV/mm | |
| dielectric constant | ASTM D-150 | 2.12 | |
| Dielectric dissipation factor | ASTM D-150 | 0.0007 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTM BS-847A | 4*10 calcm/seccm | ||
| ASTM D-648 | 90 °C | ||
| linear expansion coefficient | ASTM D-696 | 1.17*10 1/℃ | |
| burning rate | ASTM D-635 | 2.54 cm/min | |
| Shrinkage rate of mold | MCI方法 | 2.1/1.7 % | |
| Vicat softening point | ASTM D-1525 | 173 °C | |
| specific heat | ASTM C-351 | 0.47 cal/g℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top