Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 0.960 g/cm³ |
| melt mass-flow rate | | ASTM D1238 | 1.0to5.0 g/10min |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore hardness | Shore A | ASTM D2240 | 86 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | Yield | IEC 60811 | >10.0 MPa |
| Tensile strain | Break | IEC 60811 | >500 % |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| compression set | | IEC 60811 | <45 % |
| aging | Test Condition | Test Method | Test Result |
|---|
| Change rate of tensile strength in air | | IEC 60811 | 11 % |
| Tensile stress change rate | | IEC 60811 | -13 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | IEC 60167 | >1.0E+15 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| thermosetting | | IEC 60811 | 70 % |
| thermosetting | | IEC 60811 | 5.0 % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare