PC LEXAN™ DF004-WT9033
7
- Properties:Easy to demould
- Usages:Plastic bagElectrical appliancesMedical and nursing supplies
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTM D955 | 0.20 % | |
| ASTM D955 | 0.50 % | ||
| ISO 294-4 | 0.45 % | ||
| ISO 294-4 | 0.20 % | ||
| Water absorption rate | ASTM D570 | 0.10 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 5510 Mpa | |
| ISO 527-2/1 | 6000 Mpa | ||
| tensile strength | ASTM D638 | 91.0 Mpa | |
| elongation | ASTM D638 | 9.5 % | |
| Flexural modulus | ASTM D790 | 5510 Mpa | |
| bending strength | ASTM D790 | 148 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTM D4812 | 960 J/m | ||
| ISO 180/1U | 61 kJ/m² |
| injection | Test Condition | Test Method | Test Result |
|---|---|---|---|
| drying temperature | 120 °C | ||
| drying time | 4.0 hr | ||
| Suggested maximum moisture content | 0.020 % | ||
| Temperature at the rear of the barrel | 295 到 305 °C | ||
| Temperature in the middle of the barrel | 310 到 320 °C | ||
| Temperature at the front of the material cylinder | 320 到 330 °C | ||
| Processing (melt) temperature | 305 到 325 °C | ||
| Temperature | 80 到 110 °C | ||
| Back pressure | 0.200 到 0.300 Mpa | ||
| screw speed | 30 到 60 rpm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Thermal deformation temperature under load | ASTM D648 | 144 °C | |
| ASTM D648 | 139 °C | ||
| ISO 75-2/Af | 142 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top