Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Water absorption rate | | ISO62 | 6.8 % |
| Water absorption rate | | ISO62 | 2.0 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | IEC60695-11-10,-20 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO527-2 | 5400 Mpa |
| Tensile stress | | ISO527-2 | 105 Mpa |
| Tensile strain | | ISO527-2 | 4.0 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam without notch | | ISO179/1eU | 70 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO179/1eU | 70 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric strength | | IEC60243-1 | 25 KV/mm |
| | IEC60250 | 3.60 |
| | IEC60250 | 3.30 |
| Dissipation Factor | | IEC60250 | 0.010 |
| Dissipation Factor | | IEC60250 | 0.018 |
| CTI | | IEC60112 | -- V |
| Surface Resistivity | | IEC60093 | -- ohms |
| Volume resistivity | | IEC60093 | 1E+14 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO75-2/B | 205 °C |
| | ISO75-2/A | 185 °C |
| | ISO11359-2 | 3E-05 cm/cm/°C |
| | ISO11359-2 | 8E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices