PA66 1300G BK ASAHI JAPAN

Form：Granules | Grade：Enhanced level

Properties:

High rigidityhigh strengthFatigue resistanceAnti creepRapid crystallizationLow warpageLow deformability

Typical Applications:

Electrical fieldElectronic fieldEngine hood partsAutomotive sectorcomponent

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Electrical field \| Electronic field \| Engine hood parts \| Automotive sector \| component
Properties:	High rigidity \| high strength \| Fatigue resistance \| Anti creep \| Rapid crystallization \| Low warpage \| Low deformability

Certificates

No Data...

Technical Data Sheet

Other performance	Test Condition	Test Method	Test Result	Test Unit
Extreme Oxygen Index	干	ASTM D-2863	26	%
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	湿		2.2	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	干(湿)	ASTM D-785	120(110)	R scale
Rockwell hardness	Rockwell hardness	干(湿)	ASTM D-785	85(60)	M Scale
Elongation at Break	干(湿)	ASTM D-638	35(200)	%
tensile strength	干(湿)	ASTM D-638	88(67)	Mpa
flexural coefficient	干(湿)	ASTM D-790	3.0(1.3)	GPa
Impact strength of cantilever beam gap	干(湿)	ASTM D-256	39(108)	J/m
bending strength	干(湿)	ASTM D-790	128(59)	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	干	UL 94	V-2
thermal conductivity	干		0.2	W/(m.K)
Linear coefficient of thermal expansion	干	ASTM D-696	8
Hot deformation temperature	0.46MPa,干	ASTM D-648	240	°C
Hot deformation temperature	Hot deformation temperature	1.82MPa,干	ASTM D-648	75	°C
specific heat	干		1670	J/(kg.k)
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Wear factor	湿	ASTM D-1044	6
Shrinkage rate	干	旭化成方法	0.9-1.6	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top