PTFE Fluoroplex F 15 AZ 02 - GMP
0
- Properties:Fillerglass fiber reinforced material15%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| particle size distribution | 内部方法 | 405.0to665.0 µm | |
| Shrinkage rate | 内部方法 | 1.0to2.0 % | |
| density | 内部方法 | 2.20to2.24 g/cm³ | |
| Apparent density | 内部方法 | 0.60to0.70 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | 内部方法 | 60to66 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Maximum sintering temperature | 365 °C | ||
| flow time | 内部方法 | 2.6to4.0 sec |
| elastomer | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | 内部方法 | 19.0 MPa | |
| elongation | Break | 内部方法 | 190 % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top