PPS Sunny® PPS 1155

Properties:
Filler
glass fiber reinforced material
40%
filler by weight
mineral filler
10%
filler by weight
Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
density		ASTMD792	1.83 g/cm³
density	density		ISO1183	1.83 g/cm³
Shrinkage rate		ASTMD955	0.30到0.50 %
Shrinkage rate	Shrinkage rate		ISO294-4	0.30到0.50 %
Water absorption rate		ASTMD570	0.010 %
Water absorption rate	Water absorption rate		ISO62	0.010 %

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating		UL94	V-0
UL flame retardant rating	UL flame retardant rating		UL94	V-0

Mechanical properties	Test Condition	Test Method	Test Result
tensile strength		ASTMD638	125 MPa
tensile strength	tensile strength		ISO527-2/5	125 MPa
elongation		ASTMD638	1.0 %
elongation	elongation	Break	ISO527-2/5	1.1 %
Flexural modulus		ASTMD790	15500 MPa
Flexural modulus	Flexural modulus		ISO178	16000 MPa
bending strength		ASTMD790	209 MPa
bending strength	bending strength		ISO178	215 MPa

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ASTMD256	74 J/m
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ISO180/1A	7.0 kJ/m²

Thermal performance	Test Condition	Test Method	Test Result
		ASTMD648,ISO75-2/Af	265 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top