'%20/%3e%3cg%20opacity='1'%20transform='translate(150.5%200)%20rotate(0)'%3e%3cpath%20id='路径%204'%20fill-rule='evenodd'%20style='fill:%23C70000'%20opacity='1'%20d='M494%20472.601L487%20410.101L460%20472.601L494%20472.601Z'%3e%3c/path%3e%3cpath%20id='路径%203'%20fill-rule='evenodd'%20style='fill:%23003686'%20opacity='1'%20d='M80%20620.761C152%20676.261%20250%20670.761%20264.5%20670.761C351%20664.261%20412.5%20636.261%20443.5%20620.761C536%20572.261%20580.45%20516.261%20599.5%20492.261C566.05%20492.261%20483.5%20492.261%20465.5%20492.261C408%20532.761%20385.5%20541.761%20369%20550.261C262.5%20599.761%20214%20591.261%20184%20591.261C81%20584.761%2024.3%20510.211%200%20478.261C23%20580.261%2067.5%20609.261%2080%20620.761Z'%3e%3c/path%3e%3cpath%20id='路径%202'%20fill-rule='evenodd'%20style='fill:%23003686'%20opacity='1'%20d='M427.998%202.26C325.498%2014.26%20222.068%2073.64%20247.998%2063.76C384.498%2011.76%20427.998%2024.76%20437.998%2024.76C526.998%2041.76%20559.998%2085.76%20568.998%2095.76C606.498%20142.26%20611.398%20187.06%20613.498%20206.26C631.458%20206.26%20679.498%20206.26%20703.998%20206.26C692.998%20109.26%20633.378%2063.91%20622.998%2056.26C563.998%2012.76%20513.248%205.41%20491.498%202.26C467.498%20-2.24%20437.168%201.19%20427.998%202.26Z'%3e%3c/path%3e%3cpath%20id='路径%201'%20fill-rule='evenodd'%20style='fill:%23C70000'%20opacity='1'%20d='M232%20206.763C243%20178.763%20262%20156.763%20273.5%20140.263C329%2080.2634%20374%2069.7634%20410.5%2061.2634C446.5%2052.2634%20499%2061.2634%20504.5%2061.2634C446%2039.7634%20393%2040.7634%20387.5%2040.7634C308.5%2047.2634%20259.5%2075.2634%20237%2088.7634C162.5%20135.263%20122.95%20185.313%20106%20206.763C139.86%20206.763%20221.5%20206.763%20232%20206.763Z'%3e%3c/path%3e%3c/g%3e%3cpath%20id='减去顶层'%20fill-rule='evenodd'%20style='fill:%23003686'%20opacity='1'%20d='M379.519,227.698l4.237,4.101l-38.576,198.188h98.804l3.966,3.839l-7.614,38.817h-147.091l-4.064,-3.934l46.975,-241.011zM900.883,363.706c-21,-8.75%20-34.89067,-17.22667%20-41.672,-25.43c-6.78133,-8.20333%20-10.172,-19.19533%20-10.172,-32.976c0,-24.06267%208.832,-43.75033%2026.496,-59.063c17.664,-15.312%2040.55067,-22.968%2068.66,-22.968c11.266,0%2022.231,1.121%2032.895,3.363c10.664,2.242%2020.974,5.60533%2030.93,10.09l-8.139,40.672l-5.05,2.827c-6.54467,-5.18467%20-13.96233,-9.21167%20-22.253,-12.081c-9.95333,-3.44533%20-21.00033,-5.168%20-33.141,-5.168c-12.906,0%20-23.406,3.08967%20-31.5,9.269c-8.09333,6.18%20-12.14,14.08233%20-12.14,23.707c0,9.18733%2010.06233,18.32%2030.187,27.398l1.149,0.493l19.031,8.367c15.96867,7.10933%2027.64433,15.668%2035.027,25.676c7.38267,10.00733%2011.074,22.28467%2011.074,36.832c0,25.156%20-8.80467,45.226%20-26.414,60.21c-17.60933,14.98467%20-41.39833,22.477%20-71.367,22.477c-12.03133,0%20-24.30867,-1.422%20-36.832,-4.266c-12.52333,-2.84333%20-25.56633,-7.16367%20-39.129,-12.961l8.62,-44.559l4.63,-2.592c9.52333,7.45333%2019.435,13.24467%2029.735,17.374c11.59333,4.64867%2023.24167,6.973%2034.945,6.973c14.54667,0%2025.97633,-3.19933%2034.289,-9.598c8.31267,-6.39867%2012.469,-15.06667%2012.469,-26.004c0,-6.78133%20-1.914,-12.66%20-5.742,-17.636c-3.82867,-4.97667%20-9.51633,-9.051%20-17.063,-12.223zM54.3672,227.698h68.9058c25.81267,0%2045.473,5.004%2058.981,15.012c13.50733,10.008%2020.261,24.58233%2020.261,43.723c0,12.46867%20-1.996,24.82767%20-5.988,37.077c-3.992,12.25%20-9.16,21.98467%20-15.504,29.204c-8.53133,9.95267%20-19.14067,17.14433%20-31.828,21.575c-12.68733,4.42867%20-29.14817,6.643%20-49.3825,6.643h-26.9063l-17.8828,91.711h-43.7778l-3.88732,-3.761zM642.062,227.698h59.063l18.238,240.969l-4.109,3.976h-43.66l-2.297,-60.539h-0.041l-1.756,-40.844l-0.04,-0.002l-3.249,-98.607l-41.151,94.615l-0.06,-0.006l-20.5,47.5h0.005l-25.411,57.883h-43.849l-3.589,-3.474zM94.7266,268.386l-13.7813,71.859h23.4607c15.96867,0%2027.918,-3.69133%2035.848,-11.074c7.92933,-7.38267%2011.894,-18.457%2011.894,-33.223c0,-9.95333%20-2.84367,-17.03533%20-8.531,-21.246c-5.68733,-4.21067%20-15.367,-6.316%20-29.039,-6.316z'%3e%3c/path%3e%3c/svg%3e)
PC EXL9335 SABIC INNOVATIVE US
93
Form：Granules | Grade：Injection grade
Properties:
High mobilityDuctility at low temperatShort molding cycle
Typical Applications:
Electronic and Electrical ApplicationsAerospace Applicationslens
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Electronic and Electrical Applications | Aerospace Applications | lens |
| Properties: | High mobility | Ductility at low temperat | Short molding cycle |
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Charpy Notched Impact Strength | -30°C | ISO 179/1eA | 50 | kJ/m² |
| 23°C | ISO 179/1eA | 70 | kJ/m² | |
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | NoBreak | |
| 23°C | ISO 179/1eU | NoBreak | ||
| Impact strength of cantilever beam gap | -30°C | ISO 180/1A | 50 | kJ/m² |
| Suspended wall beam without notch impact strength | -30°C | ISO 180/1U | NoBreak | |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 75 | kJ/m² |
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | NoBreak | |
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| Hot filament ignition temperature | 1.0mm | IEC 60695-2-13 | 900 | °C |
| Burning wire flammability index | 1.9mm | IEC 60695-2-12 | 960 | °C |
| UL flame retardant rating | 2.5mm | UL 94 | 5VA | |
| 0.8mm | UL 94 | V-0 | ||
| 2.0mm | UL 94 | 5VB | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Bending modulus | ISO 178 | 2150 | Mpa | |
| ISO 178 | 2150 | Mpa | ||
| 50.0mmSpan | ASTM D790 | 2150 | Mpa | |
| Tensile strain | Break | ISO 527-2/50 | 100 | % |
| elongation | Break | ASTM D638 | 100 | % |
| Tensile strain | Yield | ISO 527-2/50 | 6.0 | % |
| elongation | Yield | ASTM D638 | 6.0 | % |
| tensile strength | Break | ISO 527-2/50 | 58.0 | Mpa |
| Break | ASTM D638 | 58.0 | Mpa | |
| Yield | ISO 527-2/50 | 59.0 | Mpa | |
| Tensile modulus | ASTM D638 | 2150 | Mpa | |
| tensile strength | Yield | ASTM D638 | 59.0 | Mpa |
| bending strength | ISO 178 | 86.0 | Mpa | |
| Tensile modulus | ISO 527-2/1 | 2150 | Mpa | |
| ASTM D638 | 2150 | Mpa | ||
| ISO 527-2/1 | 2150 | Mpa | ||
| bending strength | ISO 178 | 86.0 | Mpa | |
| Yield,50.0mmSpan | ASTM D790 | 86.0 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Ball Pressure Test | 125°C | IEC 60695-10-2 | Pass | |
| RTI Elec | UL 746 | 125 | °C | |
| RTI Str | UL 746 | 125 | °C | |
| RTI Imp | UL 746 | 110 | °C | |
| RTI Elec | UL 746 | 125 | °C | |
| Vicat softening temperature | ASTM D152511 | 147 | °C | |
| RTI Imp | UL 746 | 110 | °C | |
| RTI Str | UL 746 | 125 | °C | |
| Hot deformation temperature | 0.45MPa,Unannealed,3.20mm | ASTM D648 | 139 | °C |
| 0.45MPa,Unannealed,100mmSpan | ISO 75-2/Be | 139 | °C | |
| 1.8MPa,Unannealed,3.20mm | ASTM D648 | 126 | °C | |
| 1.8MPa,Unannealed,64.0mmSpan | ISO 75-2/Af | 126 | °C | |
| Vicat softening temperature | ASTM D152511 | 147 | °C | |
| -- | ISO 306/B50 | 145 | °C | |
| -- | ISO 306/B120 | 147 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Outdoor applicability | UL 746C | f1 | ||
| density | ISO 1183 | 1.24 | g/cm³ | |
| ASTM D792 | 1.24 | g/cm³ | ||
| melt mass-flow rate | 300°C/1.2kg | ASTM D1238 | 8.0 | g/10min |
| Melt Volume Flow Rate (MVR) | 300°C/1.2kg | ISO 1133 | 7.00 | cm3/10min |
| Shrinkage rate | MD：3.20mm | Internal Method | 0.40-0.80 | % |
| TD：3.20mm | Internal Method | 0.40-0.80 | % | |
| Water absorption rate | Saturation,23°C | ISO 62 | 0.12 | % |
| Equilibrium,23°C,50%RH | ISO 62 | 0.050 | % | |
| Outdoor applicability | UL 746C | f1 | ||
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Compared to the anti leakage trace index | IEC 60112 | PLC 2 | ||
| CTI | UL 746 | PLC 2 | ||
| IEC 60112 | PLC 2 | |||
| High arc combustion index | HAI | UL 746 | PLC 0 | |
| Hot wire ignition | HWI | UL 746 | PLC 2 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.