PET Rynite® FR530 NC010 DUPONT USA
461
- Properties:enhanceGlass fiber reinforcedwear resistantHigh rigidityHigh temperature resistan
- Usages:Electrical fieldElectronic fieldHousehold appliancesHousehold appliancesAutomotive sector
- Certificates:UL
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1680 | ||
| Shrinkage rate | ASTM D955 | 0.8 | % | |
| Shrinkage rate, parallel flow direction | 3.20 mm | ASTM D955 | 0.0025 | cm/cm |
| Shrinkage rate, vertical flow direction | 3.20 mm | ASTM D955 | 0.0075 | cm/cm |
| density | ISO 1183 | g/cm³ |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Tensile modulus | 23℃，注塑 | ISO 527-1,-2 | 11500 | Mpa |
| bending strength | 23℃ | ISO 178 | Mpa | |
| Bending modulus | 23℃,压缩模塑 | ISO 178 | Mpa | |
| Tensile modulus | ASTM D412/ISO 527 | 11500 | kg/cm²(MPa)[Lb/in²] | |
| Bending modulus | ASTM D790/ISO 178 | 10500 | kg/cm²(MPa)[Lb/in²] | |
| compressive strength | ASTM D695 | 200 | Mpa | |
| tensile strength | ASTM D638 | 138 | Mpa | |
| Tensile modulus | ASTM D638 | 11000 | Mpa | |
| Bending modulus | ASTM D790 | 10300 | Mpa | |
| bending strength | ASTM D790 | 200 | Mpa | |
| Across Flow | ASTM D638 | 2.1 | % | |
| Low temperature notch impact strength | ASTM D256 | 80 | J/m | |
| Gap impact strength | ASTM D256 | 91 | J/m | |
| bending strength | ASTM D790/ISO 178 | 200 | kg/cm²(MPa)[Lb/in²] | |
| Non notched impact strength | ASTM D256 | 585 | J/m |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Hot deformation temperature | 66 psi， 未退火 | ASTM D648 | 246 | °C |
| 264 psi，未退火 | ASTM D648 | 224 | °C | |
| Linear coefficient of thermal expansion, parallel flow direction | ASTM E831 | 0.000019 | cm/cm/ ℃ | |
| melting point | 254 | °C | ||
| Flame retardant grade | UL 94 | V-0 | ||
| Extreme Oxygen Index | ASTM D2863 | 33 | % | |
| Flame retardant grade | 0.900mm | UL94 | 5VA | |
| 0.350mm | UL94 | V-0 | ||
| 3.00mm | UL94 | V-0 | ||
| 2.00mm | UL94 | V-0 | ||
| Combustibility (rate) | UL94 | V-0 | ||
| Hot deformation temperature | ASTM D648/ISO 75 | 243 | ℃（℉） | |
| ASTM D648/ISO 75 | 225 | ℃（℉） | ||
| melting point | 252 | ℃（℉） | ||
| Flame retardant grade | 0.900mm | UL94 | V-0 | |
| 1.50mm | UL94 | V-0 | ||
| 0.750mm | UL94 | V-0 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top