Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.07 g/cm³ |
| melt mass-flow rate | | ASTM D1238 | 11 g/10min |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| gloss | | ASTM D523 | 93 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTM D638 | 33.7 MPa |
| Flexural modulus | | ASTM D790 | 1320 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D256 | 800 J/m |
| Impact strength of cantilever beam gap | | ASTM D256 | 1000 J/m |
| Dart impact | | ASTM D3763 | 3.95 J |
| film | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTM D882 | 15.4 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | 82.2 °C |
| Heat distortion temperature | | ASTM D648 | 51.1 °C |
| vicat | | ASTM D15252 | 196 °C |
| Linear coefficient of thermal expansion | | ASTM D696 | 1.2E-04 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare