PP Copolymer 5C10800
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO1183 | 0.908 g/cm³ | |
| Apparent density | ISO60 | 0.53到0.58 g/cm³ | |
| melt mass-flow rate | ISO1133 | 12 g/10min | |
| Water absorption rate | ISO62 | 0.020 % |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL94 | HB | |
| Hot filament ignition temperature | IEC60695-2-13 | 650 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO527-2/5 | 1300 MPa | |
| Tensile stress | ISO527-2/5 | 22.0 MPa | |
| ISO527-2/5 | 28.0 MPa | ||
| Tensile strain | ISO527-2/5 | 50 % | |
| Flexural modulus | ISO178 | 1000 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO180/1A | 4.0 kJ/m² | |
| ISO180/1A | 8.0 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ISO75-2/B | 88.0 °C | ||
| vicat | ISO306/B | 67.0 °C | |
| melting temperature | ISO11357 | 165 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top