HDPE HC 7260 PETROCHINA JILIN
399
- Properties:high densityHigh hardnessHigh stiffnessLow warpage
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| density | ASTM D-792 | 0.959 | g/cm | |
| Melt mass flow rate | 190℃/2.16kg | ASTM D-1238 | 8 | g/10min |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Environmental stress cracking | 50℃，2mm，100% Igepal，Compression Molded，F50 | ASTM D-1693B | 5 | hr |
| Shore hardness | Shore D，15 sec，Compression Molded | ASTM D-2240 | 63 | |
| Tensile yield strength | Compression Molded | ASTM D-638 | 29 | Mpa |
| Tensile yield elongation | Compression Molded | ASTM D-638 | 7.5 | % |
| Bending modulus -2% Secant | Compression Molded | ASTM D-790 | 1140 | Mpa |
| Impact strength of cantilever beam gap | Compression Molded | ASTM D-256 | 35 | J/m |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Hot deformation temperature | 0.45MPa, Unannealed，Compression Molded | ASTM D-648 | 76 | °C |
| vicat softening point | ASTM D-1525 | 126 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top