PP，HMS Hanwha Total PP EB130
0
- Usages:Automotive external partsblow molding applications
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD792 | 0.910 g/cm³ | |
| melt mass-flow rate | ASTMD1238 | 0.60 g/10min |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTMD256 | 69 J/m | |
| ASTMD256 | 无断裂 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | Yield | ASTMD638 | 26.5 MPa |
| elongation | Break | ASTMD638 | 400 % |
| Flexural modulus | ASTMD790 | 932 MPa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top