PC RAMTOUGH PZ301R8

Properties:
Filler
carbon fiber reinforced material
40%
filler by weight
Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
Shrinkage rate		ISO 2577	0.20to0.30 %
Water absorption rate	Saturation	ASTM D570	0.070 %
Water absorption rate	Water absorption rate		ISO 62	0.070 %
Shrinkage rate		ASTM D955	0.20to0.30 %
density		ASTM D792	1.35 g/cm³
density	density		ISO 1183	1.35 g/cm³
melt mass-flow rate		ASTM D1238	5.0 g/10min
melt mass-flow rate	melt mass-flow rate		ISO 1133	5.0 g/10min

Mechanical properties	Test Condition	Test Method	Test Result
bending strength		ASTM D790	185 MPa
bending strength	bending strength		ISO 178	185 MPa
Tensile modulus		ASTM D638	19500 MPa
Tensile modulus	Tensile modulus		ISO 527-2	19500 MPa
tensile strength	Yield	ASTM D638	135 MPa
tensile strength	tensile strength	Yield	ISO 527-2	135 MPa
elongation	Break	ASTM D638	1.5 %
Tensile strain	Break	ISO 527-2	1.5 %
Flexural modulus		ASTM D790	13500 MPa
Flexural modulus	Flexural modulus		ISO 178	13500 MPa

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ASTM D256	55 J/m
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ISO 180	5.5 kJ/m²

Electrical performance	Test Condition	Test Method	Test Result
Surface Resistivity		IEC 60093	30 ohms

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top