'%20/%3e%3cg%20opacity='1'%20transform='translate(150.5%200)%20rotate(0)'%3e%3cpath%20id='路径%204'%20fill-rule='evenodd'%20style='fill:%23C70000'%20opacity='1'%20d='M494%20472.601L487%20410.101L460%20472.601L494%20472.601Z'%3e%3c/path%3e%3cpath%20id='路径%203'%20fill-rule='evenodd'%20style='fill:%23003686'%20opacity='1'%20d='M80%20620.761C152%20676.261%20250%20670.761%20264.5%20670.761C351%20664.261%20412.5%20636.261%20443.5%20620.761C536%20572.261%20580.45%20516.261%20599.5%20492.261C566.05%20492.261%20483.5%20492.261%20465.5%20492.261C408%20532.761%20385.5%20541.761%20369%20550.261C262.5%20599.761%20214%20591.261%20184%20591.261C81%20584.761%2024.3%20510.211%200%20478.261C23%20580.261%2067.5%20609.261%2080%20620.761Z'%3e%3c/path%3e%3cpath%20id='路径%202'%20fill-rule='evenodd'%20style='fill:%23003686'%20opacity='1'%20d='M427.998%202.26C325.498%2014.26%20222.068%2073.64%20247.998%2063.76C384.498%2011.76%20427.998%2024.76%20437.998%2024.76C526.998%2041.76%20559.998%2085.76%20568.998%2095.76C606.498%20142.26%20611.398%20187.06%20613.498%20206.26C631.458%20206.26%20679.498%20206.26%20703.998%20206.26C692.998%20109.26%20633.378%2063.91%20622.998%2056.26C563.998%2012.76%20513.248%205.41%20491.498%202.26C467.498%20-2.24%20437.168%201.19%20427.998%202.26Z'%3e%3c/path%3e%3cpath%20id='路径%201'%20fill-rule='evenodd'%20style='fill:%23C70000'%20opacity='1'%20d='M232%20206.763C243%20178.763%20262%20156.763%20273.5%20140.263C329%2080.2634%20374%2069.7634%20410.5%2061.2634C446.5%2052.2634%20499%2061.2634%20504.5%2061.2634C446%2039.7634%20393%2040.7634%20387.5%2040.7634C308.5%2047.2634%20259.5%2075.2634%20237%2088.7634C162.5%20135.263%20122.95%20185.313%20106%20206.763C139.86%20206.763%20221.5%20206.763%20232%20206.763Z'%3e%3c/path%3e%3c/g%3e%3cpath%20id='减去顶层'%20fill-rule='evenodd'%20style='fill:%23003686'%20opacity='1'%20d='M379.519,227.698l4.237,4.101l-38.576,198.188h98.804l3.966,3.839l-7.614,38.817h-147.091l-4.064,-3.934l46.975,-241.011zM900.883,363.706c-21,-8.75%20-34.89067,-17.22667%20-41.672,-25.43c-6.78133,-8.20333%20-10.172,-19.19533%20-10.172,-32.976c0,-24.06267%208.832,-43.75033%2026.496,-59.063c17.664,-15.312%2040.55067,-22.968%2068.66,-22.968c11.266,0%2022.231,1.121%2032.895,3.363c10.664,2.242%2020.974,5.60533%2030.93,10.09l-8.139,40.672l-5.05,2.827c-6.54467,-5.18467%20-13.96233,-9.21167%20-22.253,-12.081c-9.95333,-3.44533%20-21.00033,-5.168%20-33.141,-5.168c-12.906,0%20-23.406,3.08967%20-31.5,9.269c-8.09333,6.18%20-12.14,14.08233%20-12.14,23.707c0,9.18733%2010.06233,18.32%2030.187,27.398l1.149,0.493l19.031,8.367c15.96867,7.10933%2027.64433,15.668%2035.027,25.676c7.38267,10.00733%2011.074,22.28467%2011.074,36.832c0,25.156%20-8.80467,45.226%20-26.414,60.21c-17.60933,14.98467%20-41.39833,22.477%20-71.367,22.477c-12.03133,0%20-24.30867,-1.422%20-36.832,-4.266c-12.52333,-2.84333%20-25.56633,-7.16367%20-39.129,-12.961l8.62,-44.559l4.63,-2.592c9.52333,7.45333%2019.435,13.24467%2029.735,17.374c11.59333,4.64867%2023.24167,6.973%2034.945,6.973c14.54667,0%2025.97633,-3.19933%2034.289,-9.598c8.31267,-6.39867%2012.469,-15.06667%2012.469,-26.004c0,-6.78133%20-1.914,-12.66%20-5.742,-17.636c-3.82867,-4.97667%20-9.51633,-9.051%20-17.063,-12.223zM54.3672,227.698h68.9058c25.81267,0%2045.473,5.004%2058.981,15.012c13.50733,10.008%2020.261,24.58233%2020.261,43.723c0,12.46867%20-1.996,24.82767%20-5.988,37.077c-3.992,12.25%20-9.16,21.98467%20-15.504,29.204c-8.53133,9.95267%20-19.14067,17.14433%20-31.828,21.575c-12.68733,4.42867%20-29.14817,6.643%20-49.3825,6.643h-26.9063l-17.8828,91.711h-43.7778l-3.88732,-3.761zM642.062,227.698h59.063l18.238,240.969l-4.109,3.976h-43.66l-2.297,-60.539h-0.041l-1.756,-40.844l-0.04,-0.002l-3.249,-98.607l-41.151,94.615l-0.06,-0.006l-20.5,47.5h0.005l-25.411,57.883h-43.849l-3.589,-3.474zM94.7266,268.386l-13.7813,71.859h23.4607c15.96867,0%2027.918,-3.69133%2035.848,-11.074c7.92933,-7.38267%2011.894,-18.457%2011.894,-33.223c0,-9.95333%20-2.84367,-17.03533%20-8.531,-21.246c-5.68733,-4.21067%20-15.367,-6.316%20-29.039,-6.316z'%3e%3c/path%3e%3c/svg%3e)
PBT 2002 JAPAN POLYPLASTIC
135
Form：Granules | Grade：Injection grade
Properties:
Flame retardantGood flexibilityGlass fiber reinforcedFriction resistance
Typical Applications:
Electrical fieldElectronic field
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Electrical field | Electronic field |
| Properties: | Flame retardant | Good flexibility | Glass fiber reinforced | Friction resistance |
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 190 | kJ/m² |
| 23°C | ISO 179/1eU | 无断裂 | ||
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | UL 94 | HB | ||
| 0.710mm | UL 94 | HB | ||
| Extreme Oxygen Index | ISO 4589-2 | 22 | % | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Bending modulus | 23°C | ISO 178 | 2500 | Mpa |
| bending strength | 23°C | ISO 178 | 80.0 | Mpa |
| -40°C | -40℃ | ASTM D638 | 3100 | Mpa |
| 23°C | ASTM D638 | 3170 | Mpa | |
| 80°C | 80℃ | ASTM D638 | 469 | Mpa |
| 121°C | 121℃ | ASTM D638 | 296 | Mpa |
| Surrender- 40°C | ASTM D638 | 101 | Mpa | |
| Yield, 0 ° C | Yield,0°C | ASTM D638 | 75.8 | Mpa |
| Surrender, 23 ° C | ASTM D638 | 55.8 | Mpa | |
| Yield, 80 ° C | ASTM D638 | 24.8 | Mpa | |
| Yield, 121 ° C | ASTM D638 | 17.9 | Mpa | |
| yield | ISO 527-2/1A/50 | 60.0 | Mpa | |
| elongation | ASTM D-638 | >200 | % | |
| bending strength | ASTM D-790 | 85 | Mpa | |
| Impact strength of cantilever beam gap | ASTM D-256 | 34 | J/m | |
| Bending modulus | ASTM D-790 | 2540 | Mpa | |
| tensile strength | ASTM D-638 | 51 | Mpa | |
| crack | ISO 527-2/1A/50 | 35.0 | Mpa | |
| bending strength | ASTM D790/ISO 178 | 85 | kg/cm²(MPa)[Lb/in²] | |
| Bending modulus | ASTM D790/ISO 178 | 2540 | kg/cm²(MPa)[Lb/in²] | |
| tensile strength | ASTM D638/ISO 527 | 51 | kg/cm²(MPa)[Lb/in²] | |
| Elongation at Break | ASTM D638/ISO 527 | >200 | % | |
| Impact strength of cantilever beam gap | ASTM D256/ISO 179 | 34 | kg·cm/cm(J/M)ft·lb/in | |
| Charpy Notched Impact Strength | ISO 179/1eA | 3.2 | kJ/m² | |
| Bending modulus | ISO 178 | 3100 | Mpa | |
| bending strength | ISO 178 | 95 | Mpa | |
| tensile strength | ISO 527-1/-2 | 57 | Mpa | |
| bending strength | ISO 178 | 95.0 | Mpa | |
| Bending modulus | ISO 178 | 3100 | Mpa | |
| Nominal tensile fracture strain | ISO 527-2 | 12 | % | |
| tensile strength | ISO 527-2 | 57.0 | Mpa | |
| 50% strain | 50%Strain | ISO 527-2/1A/50 | 30.0 | Mpa |
| Surrender- 40°C | ASTM D638 | 7.2 | % | |
| Yield, 0 ° C | Yield,0°C | ASTM D638 | 4.4 | % |
| Surrender, 23 ° C | ASTM D638 | 3.2 | % | |
| Yield, 80 ° C | ASTM D638 | 17 | % | |
| Yield, 121 ° C | ASTM D638 | 23 | % | |
| yield | ISO 527-2/1A/50 | 4.0 | % | |
| Fracture, 23 ° C | ASTM D638 | 200 | % | |
| crack | ISO 527-2/1A/50 | 220 | % | |
| Nominal tensile fracture strain | ISO 527-2/1A/50 | >50 | % | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| 0.45MPa, unannealed | ASTM D648 | 160 | °C | |
| ISO 75-2/B | 150 | °C | ||
| 1.8MPa, unannealed | ASTMD648 | 55.0 | °C | |
| Hot deformation temperature | 1.82Mpa | ASTM D-648 | 70 | °C |
| UL flame retardant rating | UL 94 | HB | ||
| Hot deformation temperature | HDT | ASTM D648/ISO 75 | 70 | ℃（℉） |
| Linear coefficient of thermal expansion | TD：23to55°C | Internal Method | 9E-05 | cm/cm/°C |
| MD：23to55°C | Internal Method | 9E-05 | cm/cm/°C | |
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 80.0 | °C |
| UL flame retardant rating | UL 94 | HB | ||
| Hot deformation temperature | 1.8Mpa | ISO 75-1/-2 | 80 | °C |
| Glass transition temperature | ISO 11357-2 | 60.0 | °C | |
| Vicat softening temperature | ISO 306/B50 | 190 | °C | |
| Melting temperature | ISO 11357-3 | 225 | °C | |
| Linear coefficient of thermal expansion | MD | ISO 11359-2 | 1.1E-04 | cm/cm/°C |
| TD | ISO 11359-2 | 1.4E-04 | cm/cm/°C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ASTM D792/ISO 1183 | 792 | ||
| melt mass-flow rate | ASTM D1238 | 20 | g/10min | |
| Melt Volume Flow Rate (MVR) | 250°C/2.16kg | ISO 1133 | 18.0 | cm3/10min |
| flow | ASTM D955 | 1.8to2.0 | % | |
| Vertical flow direction | ISO 294-4 | 1.8to2.0 | % | |
| Flow | ISO 294-4 | 1.8to2.0 | % | |
| Water absorption rate | Equilibrium,23°C,50%RH | ISO 62 | 0.19 | % |
| 23°C,24hr | ISO 62 | 0.20 | % | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric strength | 3.00mm | IEC 60243-1 | 17 | KV/mm |
| 1MHz | 1MHz | ASTM D150 | 3.20 | |
| 100Hz | 100Hz | IEC 60250 | 4.00 | |
| 1MHz | 1MHz | IEC 60250 | 3.50 | |
| Dissipation factor | 100Hz | IEC 60250 | 1.4E-03 | |
| 1MHz | IEC 60250 | 0.022 | ||
| Compared to the anti leakage trace index | IEC 60112 | PLC 0 | ||
| Surface resistivity | IEC 60093 | 1E+15 | ohms | |
| --1 | ASTM D149 | 17 | KV/mm | |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Rockwell hardness | M-Sale | ISO 2039-2 | 78 | |
| M-Scale | ISO 2039-2 | 85 | ||
| Supplementary Information | Test Condition | Test Method | Test Result | Test Unit |
| ColourNumber | EF2001/ED3002 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.