HIPS MB5210
17
- Properties:heat-resistingHigh impact resistanceUltra high glossHigh impact resistanceResistance to thermal disGood liquidityGood injection molding peUltra high glossHigh impact resistanceResistance to thermal disGood liquidityGood injection molding pe
- Usages:Electrical enclosureHousehold goodsDecorative panelAir conditioning panelRefrigerator top coverWashing machine panelHousehold appliances such as water heater coversHousehold appliances such as air conditioning paneDecorative panel
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | D792 | 1.03 g/cm³ | |
| melt mass-flow rate | D1238 | 4 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Notch impact strength | D256 | 96 J/m | |
| D256 | 107 J/m | ||
| tensile yield strength | D638 | 33 Mpa | |
| tensile breaking strength | D638 | 25 Mpa | |
| tensile elongation at break | D638 | 50 % | |
| Tensile modulus | D638 | 2340 Mpa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | D1525 | 102 °C | |
| flammability | UL 94 | HB |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top