Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.90 g/cm³ |
| Shrinkage rate | | ASTMD955 | 0.20 % |
| Shrinkage rate | | ASTMD955 | 0.90 % |
| Water absorption rate | | ASTMD570 | 0.030 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | M-Scale | ASTMD785 | 100 |
| Rockwell hardness | R-Scale | ASTMD785 | 121 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| bending strength | | ASTMD790 | 150 MPa |
| compressive strength | | ASTMD695 | 120 MPa |
| Poisson's ratio | | | 0.34 |
| Tensile modulus | | ASTMD638 | 20000 MPa |
| tensile strength | | ASTMD638 | 100 MPa |
| Steel - Dynamic | ASTMD1894 | 0.32 |
| Steel - Static | ASTMD1894 | 0.32 |
| Fracture bending elongation | | ASTMD790 | 0.80 % |
| elongation | Break | ASTMD638 | 0.60 % |
| Flexural modulus | | ASTMD790 | 19000 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 60 J/m |
| Suspended wall beam without notch impact strength | | ASTMD256 | 200 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTMD257 | 1.0E+2到1.0E+3 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD696 | 2E-05 cm/cm/°C |
| | ASTMD648 | 265 °C |
| | ASTMD696 | 2E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare