PBT TZ6 280-T5.03.10 DSM Additive Manufacturing

Properties:

Filler glass fiber reinforced material 20% filler by weight glass beads 20% filler by weight

Product Description

Certificates(0)

Datasheet

Product Description

Properties:

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	40	kJ/m²
Charpy Notched Impact Strength	23°C	ISO 179/1eA	5.5	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.6mm	IEC 60695-11-10,-20	HB
UL flame retardant rating	UL flame retardant rating	0.8mm	IEC 60695-11-10,-20	HB
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile strain	Break	ISO 527-2	2.5	%
tensile strength	Break	ISO 527-2	100	MPa
Tensile modulus		ISO 527-2	8700	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	195	°C
Hot deformation temperature	Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	210	°C
Linear coefficient of thermal expansion	MD	ISO 11359-2	4E-05	cm/cm/°C
Melting temperature		ISO 11357-3	225	°C
Linear coefficient of thermal expansion	TD	ISO 11359-2	7.5E-05	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.15	%
Water absorption rate	Water absorption rate	Saturation,23°C	ISO 62	0.25	%
density		ISO 1183	1.60	g/cm³
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		IEC 60093	>1.0E+15	ohms·cm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top