POM POLIPOM LUB LUB C100 NA Y
24
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | ISO 62 | 0.20 % | |
| Shrinkage rate | 1.8-2.2 % | ||
| melt mass-flow rate | ISO 1133 | 10 g/10min |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ISO 180 | 无断裂 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile strain | ISO 527-2 | 70 % | |
| ISO 527-2 | 11 % | ||
| tensile strength | ISO 527-2 | 55.0 Mpa | |
| Tensile modulus | ISO 527-2 | 2900 Mpa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 0 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melting temperature | DSC | 175 °C | |
| ball-indentation hardness | IEC 60695-10-2 | 通过 | |
| vicat | ISO 306/A120 | 165 °C | |
| Heat distortion temperature | 80.0 °C | ||
| ISO 75-2/A | 106 °C | ||
| ISO 75-2/B | 165 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top