Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | ASTMD955 | 0.090 % |
| Water absorption rate | | ASTMD570 | 0.17 % |
| density | | ASTMD792 | 1.83 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Barcol Hardness | | ASTMD2583 | 55到60 |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| Optical Density | | ASTME662 | 0.700 |
| Optical Density | | ASTME662 | 6.90 |
| Optical Density | | ASTME662 | 0.00 |
| Optical Density | | ASTME662 | 1.00 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| FlameSpreadIndex | | ASTME662 | 12.9 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| compressive strength | | ASTMD695 | 160 MPa |
| Tensile modulus | | ASTMD638 | 15300 MPa |
| tensile strength | | ASTMD638 | 63.8 MPa |
| Flexural modulus | | ASTMD790 | 10700 MPa |
| bending strength | | ASTMD790 | 145 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Suspended wall beam without notch impact strength | | ASTMD4812 | 680 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric strength | | ASTMD149 | 17 kV/mm |
| arc resistance | | ASTMD495 | 180 sec |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare