
PBT HR5315HFS BK591 DUPONT USA
104
Form:Granules
Properties:
Flame retardantGlass fiber reinforced
Typical Applications:
Electronic and electrical componentsAutomotive Applications
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Electronic and electrical components | Automotive Applications |
| Properties: | Flame retardant | Glass fiber reinforced |
Certificates
No Data...
Technical Data Sheet
| Filling analysis | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Melt viscosity | 250°C,1000sec^-1 | ISO 11443 | 175 | Pa·s |
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 57 | kJ/m² |
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| Burning rate | 1.00mm | ISO 3795 | 32 | mm/min |
| Extreme Oxygen Index | ISO 4589-2 | 20 | % | |
| Flammability level | 1.50mm | IEC 60695-11-10,-20 | HB | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| bending strength | ISO 178 | 143 | Mpa | |
| Tensile strain | Break | ISO 527-2 | 3.3 | % |
| tensile strength | Break | ISO 527-2 | 95.0 | Mpa |
| Tensile modulus | ISO 527-2 | 5000 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Melting temperature | ISO 11357-3 | 225 | °C | |
| Glass transition temperature | ISO 11357-2 | 65.0 | °C | |
| 1.8MPa, unannealed | ISO 75-2/A | 200 | °C | |
| 0.45MPa, unannealed | ISO 75-2/B | 220 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | Equilibrium,23°C,2.00mm,50%RH | ISO 62 | 0.15 | % |
| 23°C,24hr,2.00mm | ISO 62 | 0.40 | % | |
| Shrinkage rate | MD | ISO 294-4 | 0.50 | % |
| TD | ISO 294-4 | 1.1 | % | |
| Melt Volume Flow Rate (MVR) | 250°C/2.16kg | ISO 1133 | 13.5 | cm3/10min |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dissipation factor | 1MHz | IEC 60250 | 0.010 | |
| 100Hz | IEC 60250 | 0.010 | ||
| Dielectric strength | IEC 60243-1 | 35 | KV/mm | |
| Volume resistivity | IEC 60093 | >1.0E+15 | ohms·cm | |
| Surface resistivity | IEC 60093 | >1.0E+15 | ohms |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.