Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Water absorption rate | | ISO62 | 1.1 % |
| Water absorption rate | | ISO62 | 3.1 % |
| Outdoor applicability | | UL746C | f1 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| UL flame retardant rating | | UL94 | V-0 |
| UL flame retardant rating | | UL94 | V-0 |
| UL flame retardant rating | | UL94 | V-0 |
| Burning wire flammability index | | IEC60695-2-12 | 960 °C |
| Burning wire flammability index | | IEC60695-2-12 | 960 °C |
| Burning wire flammability index | | IEC60695-2-12 | 960 °C |
| GlowWireIgnitionTemperature | | IEC60695-2-13 | 650 °C |
| Limiting Oxygen Index | | ISO4589-2 | 33 % |
| FrenchFireIndex | | NFF16-101 | F2 |
| FrenchSmokeIndex | | NFF16-101 | I2 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| EuropeanRailwaysCertifications | | EN45545-2 | HL2 |
| EuropeanRailwaysCertifications | | EN45545-2 | HL3 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO527-2/1A | 3750 Mpa |
| tensile strength | | ASTMD638 | 85.0 Mpa |
| Tensile stress | | ISO527-2/1A | 80.0 Mpa |
| Tensile stress | | ISO527-2/1A | 70.0 Mpa |
| Tensile strain | | ISO527-2 | 4.0 % |
| elongation | | ASTMD638 | 15 % |
| Tensile strain | | ISO527-2 | 12 % |
| Flexural modulus | | ASTMD790 | 3800 Mpa |
| Flexural modulus | | ISO178 | 3700 Mpa |
| bending strength | | ASTMD790 | 125 Mpa |
| Bending stress | | ISO178 | 130 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam without notch | | ISO179/1eU | 80 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO179/1eU | 70 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| CTI | | IEC60112 | 600 V |
| Surface Resistivity | | IEC60093 | 1E+15 ohms |
| Volume resistivity | | IEC60093 | 1E+15 ohms·cm |
| Electrical strength | | IEC60243-1 | 33 KV/mm |
| | IEC60250 | 3.60 |
| Dissipation Factor | | IEC60250 | 0.020 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | 85.0 °C |
| | ISO75-2/Af | 85.0 °C |
| melting temperature | | ISO11357-3 | 242 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare