PA/ABS NM-19 INEOS STYRO KOREA

Form：Granules | Grade：Injection grade

Properties:

UV resistanceEasy to processHigh mobilityHigh impact resistance

Typical Applications:

Automotive sectorAutomotive interior parts

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive sector \| Automotive interior parts
Properties:	UV resistance \| Easy to process \| High mobility \| High impact resistance

Certificates

No Data...

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-2	2000	Mpa
bending strength		ISO 178	62.0	Mpa
Bending modulus		ISO 178	1800	Mpa
Tensile strain	Yield,23°C	ISO 527-2	3.5	%
tensile strength	Yield,23°C	ISO 527-2	43.0	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa,Annealed	ISO 75-2/B	85.0	°C
Linear coefficient of thermal expansion	MD	ISO 11359-2	1E-04	cm/cm/°C
Vicat softening temperature	--	ISO 306/B50	102	°C
Vicat softening temperature	Vicat softening temperature	--	ISO 306/A50	160	°C
Hot deformation temperature	1.8MPa,Annealed	ISO 75-2/A	65.0	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	1.2	%
Shrinkage rate		ISO 294-4	0.80	%
Melt Volume Flow Rate (MVR)	240°C/10.0kg	ISO 1133	30.0	cm3/10min
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dissipation factor	1MHz	IEC 60250	0.015
Relative permittivity	1MHz	IEC 60250	2.90
Volume resistivity		IEC 60093	>1.0E+15	ohms·cm
Surface resistivity		IEC 60093	1E+14	ohms
hardness	Test Condition	Test Method	Test Result	Test Unit
Ball Pressure Test		ISO 2039-1	86.0	Mpa
Rockwell hardness	R-Scale	ISO 2039-2	103
film	Test Condition	Test Method	Test Result	Test Unit
elongation	Break	ISO 527-3	>50	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top