SMMA CET 230
10
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Density | ASTM D792 | 1.06 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 6 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 1970 Mpa | |
| Tensile strength | ASTM D638 | 26 Mpa | |
| Tensile strain | ASTM D638 | 35 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 21 J/m | |
| Cantilever beam without notch impact strength | ASTM D256 | 220 J/m |
| Optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| transmittance | ASTM D1003 | 88 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Hot deformation temperature | ASTM D648 | 72 °C | |
| Vicat softening temperature | ASTM D1525 | 74 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top