ABS KR-2888-IE
0
CompareTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | 2.2 g/10min | ||
| density | 1.06 g/cm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | 50 MPa | ||
| elongation | 3.1 % | ||
| Impact strength of cantilever beam gap | 13 KJ/m | ||
| 6.0 KJ/m | |||
| Flexural modulus | 2400 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| dielectric strength | 130 KV/mm | ||
| Volume resistivity | 10 Ω．cm | ||
| Surface Resistivity | 10 Ω | ||
| dielectric constant | 3.0 | ||
| Dielectric loss | 0.01 10 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | 103 ℃ | ||
| vicat | 108 ℃ | ||
| Linear coefficient of thermal expansion | 0.8-1.1 10 | ||
| UL flame retardant rating | UL 94 | HB |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top