DAP Generic DAP - Mineral
0
- Properties:Fillermineral filler
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 1.75to1.86 g/cm³ | |
| Shrinkage rate | ASTM D1895 | 2.3 | |
| ASTM D955 | 0.25to0.51 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D638 | 51.7to55.2 MPa | |
| Flexural modulus | ASTM D790 | 8170to11700 MPa | |
| bending strength | ASTM D790 | 89.6to104 MPa | |
| compressive strength | ASTM D695 | 144to152 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 21to32 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| dielectric strength | ASTM D149 | 14to16 kV/mm | |
| dielectric constant | ASTM D150 | 3.68to4.70 | |
| Dissipation Factor | ASTM D150 | 0.010to0.025 | |
| arc resistance | ASTM D495 | 135to180 sec |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 161to274 °C | |
| Linear coefficient of thermal expansion | ASTM D696 | 2.5E-5到4.6E-5 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top