PA66 J350-GF30
0
- Properties:Fillerglass fiber reinforced material30%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ISO 294-4 | 0.80 % | |
| ISO 294-4 | 0.30 % | ||
| Water absorption rate | ISO 62 | 6.0 % | |
| ISO 62 | 2.0 % | ||
| density | ISO 1183 | 1.36 g/cm³ |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 9000 MPa | |
| tensile strength | Break | ISO 527-2/5 | 170 MPa |
| Tensile strain | Break | ISO 527-2/5 | 3.0 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | 6.5 kJ/m² | |
| Impact strength of simply supported beam without notch | ISO 179/1eU | 50 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/B | 250 °C | |
| melting temperature | DSC | 260 °C | |
| Heat distortion temperature | ISO 75-2/A | 250 °C | |
| vicat | ISO 306/B50 | 245 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top