PPS 1140A64 JAPAN POLYPLASTIC

Form：Granules | Grade：Injection grade

Properties:

Glass fiber reinforcedHigh rigidityhigh strengthHigh impact resistanceFlame retardant

Typical Applications:

small home appliancesFitness equipmentElectrical fieldElectronic fieldAutomotive sectorsporting goods

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	small home appliances \| Fitness equipment \| Electrical field \| Electronic field \| Automotive sector \| sporting goods
Properties:	Glass fiber reinforced \| High rigidity \| high strength \| High impact resistance \| Flame retardant

Certificates

No Data...

Technical Data Sheet

Filling analysis	Test Condition	Test Method	Test Result	Test Unit
Melt viscosity	310°C,1000sec^-1	ISO 11443	240	Pa·s
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL 94	V-0
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength		ASTM D638/ISO 527	200	kg/cm²(MPa)[Lb/in²]
Bending modulus		ASTM D790/ISO 178	14000	kg/cm²(MPa)[Lb/in²]
bending strength		ASTM D790/ISO 178	280	kg/cm²(MPa)[Lb/in²]
Elongation at Break		ASTM D638/ISO 527	1.8	%
tensile strength		ISO 527-2	200	Mpa
Tensile strain	Break	ISO 527-2	1.8	%
Bending modulus		ISO 178	14000	Mpa
bending strength		ISO 178	280	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Combustibility (rate)		UL 94	V-0
Linear coefficient of thermal expansion		ASTM D696/ISO 11359	2	mm/mm.℃
	Linear coefficient of thermal expansion	TD		4E-05	cm/cm/°C
	Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	MD		2E-05	cm/cm/°C
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	270	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792/ISO 1183	1.66
Water absorption rate		ASTM D570/ISO 62	0.01	%
Water absorption rate	Water absorption rate	23°C,24hr	ISO 62	0.040	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		ASTM D257/IEC 60093	4.0 x 10^16	Ω.cm
Volume resistivity	Volume resistivity		IEC 60093	4E+16	ohms·cm
Dielectric strength	3.00mm	IEC 60243-1	16	KV/mm
Dielectric constant	1kHz	IEC 60250	4.50
Dielectric constant	Dielectric constant	1MHz	IEC 60250	4.50
Dissipation factor	1kHz	IEC 60250	1E-03
	Dissipation factor	1MHz	IEC 60250	2E-03
	Dissipation factor	Dissipation factor	耐电弧性	IEC 60250	123	sec
Compared to the anti leakage trace index		IEC 60112	PLC 4
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
ColourNumber			HF2000/HD9100

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top