
Product Description
Certificates(1)
Datasheet
Product Description
Certificates

Technical Data Sheet
| machinability | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Dry conditions | 热风干燥 120℃---5-8小时 140℃---约4小时 | |||
| Processing temperature | 235 | °C | ||
| 250 | °C | |||
| 240 | °C | |||
| 245 | °C | |||
| Screw speed | 80-150 | rpm | ||
| Mold temperature | 60-80 | °C | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Tensile modulus | ASTM D638/ISO 527 | 2400 | kg/cm²(MPa)[Lb/in²] | |
| Bending modulus | ASTM D790/ISO 178 | 2600 | kg/cm²(MPa)[Lb/in²] | |
| bending strength | ASTM D790/ISO 178 | 90 | kg/cm²(MPa)[Lb/in²] | |
| Elongation at Break | ASTM D638/ISO 527 | 30 | % | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Combustibility (rate) | UL 94 | V-2 | ||
| Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 1.E-04 | mm/mm.℃ | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ASTM D792/ISO 1183 | 1.42 | ||
| Shrinkage rate | ASTM D955 | 1.4 | % | |
| Water absorption rate | ASTM D570/ISO 62 | 0.08 | % | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Surface resistivity | ASTM D257/IEC 60093 | 1.E+15 | Ω | |
| Dielectric constant | ASTM D150/IEC 60250 | 3.2 | ||
| Volume resistivity | ASTM D257/IEC 60093 | 1.E+14 | Ω.cm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.