SBS Elastron® D D400.A80.B
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD792 | 0.900 g/cm³ | |
| Shrinkage rate | ASTMD955 | 2.3 % | |
| ASTMD955 | 1.6 % | ||
| density | ASTM D792 | 0.900 g/cm³ | |
| Shrinkage rate | ASTM D955 | 2.3 % | |
| 1.6 |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore A | ASTMD2240 | 80 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| compression set | ASTM D395 | 28 % | |
| hardness | ASTM D412 | 80 | |
| Tensile stress | ASTM D412 | 4.00 MPa | |
| ASTM D412 | 5.30 MPa | ||
| tensile strength | Break | ASTM D412 | 7.00 MPa |
| elongation | Break | ASTM D412 | 500 % |
| tear strength | ASTM D624 | 50.0 kN/m |
| elastomer | Test Condition | Test Method | Test Result |
|---|---|---|---|
| elongation | Break | ASTMD412 | 500 % |
| tear strength | ASTMD624 | 50.0 kN/m | |
| compression set | ASTMD395 | 28 % | |
| Tensile stress | ASTMD412 | 4.00 MPa | |
| ASTMD412 | 5.30 MPa | ||
| tensile strength | Break | ASTMD412 | 7.00 MPa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top