
HIPS 666 TAIDA TAIWAN
93
Form:Granules | Grade:Impact resistant grade
Properties:
High glossHigh impact resistanceHigh impact resistance in
Typical Applications:
Household appliancesHousehold appliancesShellComputer peripheral productsHome appliance products
Product Description
Certificates(3)
Datasheet
Product Description
| Typical Applications: | Household appliances | Household appliances | Shell | Computer peripheral products | Home appliance products |
| Properties: | High gloss | High impact resistance | High impact resistance in |
Certificates
TDS
TDS_ISO

Technical Data Sheet
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| melt mass-flow rate | ASTM D-1238 | 7.0 | g/10min | |
| Water absorption rate | ASTM D-570 | 0.04 | wt% | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Impact strength of cantilever beam gap | ASTM D-256 | 9.0 | Kgf.cm/cm | |
| tensile strength | ASTM D-638 | 270 | Kgf/cm | |
| elongation | ASTM D-638 | 45 | % | |
| bending strength | ASTM D-790 | 470 | Kgf/cm | |
| flexural coefficient | ASTM D-790 | 2.2×10 | Kgf/cm | |
| Rockwell hardness | ASTM D-785 | 96 | R scale | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | HDT | ASTM D-648 | 85 | °C |
| Vicat softening temperature | ASTM D-1525 | 99 | °C | |
| Flame resistance | UL 94 | HB | ||
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ASTM D-792 | 1.05 | ||
| Shrinkage rate | ASTM D-955 | 0.6 | % | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Induced positive connection | ASTM D-150 | 0.0005 | ||
| ASTM D-150 | 2.6 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.