Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO1183 | 1.22 g/cm³ |
| melt mass-flow rate | | ISO1133 | 9.0 g/10min |
| Melt volume flow rate | | ISO1133 | 8.50 cm3/10min |
| Shrinkage rate | | ISO294-4 | 1.5 % |
| Shrinkage rate | | ISO294-4 | 1.5 % |
| Water absorption rate | | ISO62 | 0.50 % |
| Water absorption rate | | ISO62 | 0.60 % |
| Water absorption rate | | ISO62 | 0.20 % |
| MediumDensity | | | 1.06 g/cm³ |
| SpecificHeatCapacity of Melt | | | 2150 J/kg/°C |
| ThermalConductivityofMelt | | | 0.15 W/m/K |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | ISO868 | 63 |
| | ISO868 | 57 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | HB |
| UL flame retardant rating | | UL94 | HB |
| UL flame retardant rating | | IEC60695-11-10,-20 | HB |
| UL flame retardant rating | | IEC60695-11-10,-20 | HB |
| Limiting Oxygen Index | | ISO4589-2 | 21 % |
| FMVSS flammability | | FMVSS302 | SE |
| Fogging-G-value | | ISO6452 | 1E-04 g |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Emissions of Organic Compounds | | VDA277 | 2.50 µgC/g |
| Odor | | VDA270 | 2.50 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Tensile impact strength | | ISO8256/1 | 300 kJ/m² |
| Charpy Notched Impact Strength | | ISO179/1eA | 15 kJ/m² |
| Charpy Notched Impact Strength | | ISO179/1eA | 25 kJ/m² |
| Charpy Notched Impact Strength | | ISO179/1eA | 120 kJ/m² |
| Impact strength of cantilever beam gap | | ISO180/1A | 19 kJ/m² |
| Impact strength of cantilever beam gap | | ISO180/1A | 81 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile stress | | ISO527-2 | 43.0 Mpa |
| Tensile stress | | ISO527-2 | 12.0 Mpa |
| Tensile stress | | ISO527-2 | 15.0 Mpa |
| Tensile stress | | ISO527-2 | 18.8 Mpa |
| Tensile stress | | ISO527-2 | 19.0 Mpa |
| Tensile strain | | ISO527-2 | 31 % |
| Tensile strain | | ISO527-2 | >300 % |
| Nominal tensile fracture strain | | ISO527-2 | 500 % |
| TensileCreepModule | | ISO899-1 | 248 Mpa |
| Tensile creep modulus | | ISO899-1 | 182 Mpa |
| Tensile modulus | | ISO527-2 | 280 Mpa |
| Tensile stress | | ISO527-2 | 20.0 Mpa |
| Flexural modulus | | ISO178 | 290 Mpa |
| abrasion resistance | | ISO4649 | 110 mm³ |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| tear strength | | ISO34-1 | 150 kN/m |
| tear strength | | ISO34-1 | 160 kN/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| | IEC60250 | 4.10 |
| Dissipation Factor | | IEC60250 | 0.012 |
| Dissipation Factor | | IEC60250 | 0.036 |
| Surface Resistivity | | IEC60093 | >1.0E+15 ohms |
| Volume resistivity | | IEC60093 | 8E+13 ohms·cm |
| dielectric strength | | IEC60243-1 | 20 KV/mm |
| | IEC60250 | 4.60 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO75-2/B | 80.0 °C |
| | ISO75-2/A | 45.0 °C |
| brittle temperature | | ISO974 | -96.0 °C |
| Glass transition temperature 2 | | ISO11357-2 | 0.00 °C |
| vicat | | ISO306/A50 | 195 °C |
| vicat | | ISO306/B50 | 100 °C |
| melting temperature | | ISO11357-3 | 210 °C |
| | ISO11359-2 | 1.9E-04 cm/cm/°C |
| | ISO11359-2 | 1.6E-04 cm/cm/°C |
| | ASTME831 | 1.7E-04 cm/cm/°C |
| | ISO11359-2 | 1.8E-04 cm/cm/°C |
| | ISO11359-2 | 1.5E-04 cm/cm/°C |
| | ISO11359-2 | 5.44E-08 m²/s |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices