PP SINELEC CCB6814 USA Tenor Aps

Usages:
sheet
Compare

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ASTM D256	900 J/m
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ASTM D256	900 J/m

mechanical properties	Test Condition	Test Method	Test Result
tensile strength	Yield	ASTM D638	30.0 MPa
elongation	Break	ASTM D638	75 %
Bending modulus		ASTM D790	1270 MPa
bending strength		ASTM D790	35.0 MPa
tensile strength	Yield	ASTM D638	30.0 MPa
elongation	Break	ASTM D638	75 %
Bending modulus		ASTM D790	1270 MPa
bending strength		ASTM D790	35.0 MPa

Physical properties	Test Condition	Test Method	Test Result
melt mass-flow rate	230°C/5.0kg	ASTM D1238	1.0to5.0 g/10min
density		ASTM D792	1.01 g/cm³
density	density		ASTM D792	1.01 g/cm³
melt mass-flow rate	230°C/5.0kg	ASTM D1238	1.0to5.0 g/10min

Electrical performance	Test Method	Test Result
Surface resistivity	ASTM D257	<1.0E+5 ohms
Volume resistivity	ASTM D257	<1.0E+5 ohms·cm
Surface resistivity	ASTM D257	<1.0E+5 ohms
Volume resistivity	ASTM D257	<1.0E+5 ohms·cm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top