PC/ABS LDS3720 MITSUBISHI ENGINEERING JAPAN

Form：Granules | Grade：Blow molding grade

Properties:

heat-resistingHigh impact resistance

Typical Applications:

ShellElectronic and Electrical Applications

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Shell \| Electronic and Electrical Applications
Properties:	heat-resisting \| High impact resistance

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Multi axis Instrumented Impact Energy	-20°C2	Internal Method	10.0	J
	Multi axis Instrumented Impact Energy	23°C	ISO 6603-2	35.0	J
	Multi axis Instrumented Impact Energy	Multi axis Instrumented Impact Energy	23°C2	Internal Method	25.0	J
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	NoBreak
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	NoBreak
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.5mm	UL 94	HB
UL flame retardant rating	UL flame retardant rating	0.70mm	IEC 60695-11-10,-20	HB
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile strain	Yield	ISO 527-2	4.0	%
Nominal tensile fracture strain		ISO 527-2	>50	%
Bending modulus		ISO 178	2250	Mpa
bending strength		ISO 178	80.0	Mpa
Tensile modulus		ISO 527-2	2250	Mpa
tensile strength	Yield	ISO 527-2	51.0	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	102	°C
Vicat softening temperature		ISO 306/B50	122	°C
Linear coefficient of thermal expansion	MD	ISO 11359-2	7E-05	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD	ISO 11359-2	7E-05	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Melt Volume Flow Rate (MVR)	260°C/5.0kg	ISO 1133	13.0	cm3/10min
Shrinkage rate		ISO 294-4	0.60	%
Water absorption rate	Saturation,23°C	ISO 62	0.60	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	>1.0E+15	ohms
Volume resistivity		IEC 60093	>1.0E+15	ohms·cm
Dielectric constant	1.00GHz	IEC 60250	2.80
Dissipation factor		IEC 60250	5E-03

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top