mMDPE TOTAL Polyethylene Lumicene® M 3410 EP (EU - Blow Molding)
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 0.934 g/cm³ | |
| melt mass-flow rate | ISO 1133 | 0.90 g/10min | |
| Environmental stress cracking resistance | ASTM D1693B | >1000 hr |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Blow molding temperature | 160to200 °C |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | 80 kJ/m² |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top