Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Mold shrinkage rate | | ASTM D-955 | 0.3-0.5 % |
| Mold shrinkage rate | | ASTM D-955 | 0.5-0.9 % |
| other | Test Condition | Test Method | Test Result |
|---|
| | | 阻然级，15%玻纤。 |
| Basic performance | Test Condition | Test Method | Test Result |
|---|
| moisture content | | ASTM D-570 | 0.07 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Notch impact strength | | ASTM D-256 | 6 kg.cm/cm |
| Rockwell hardness | | ASTM D-785 | 120 R |
| bending strength | | ASTM D-790 | 1600 kg/cm2 |
| Flexural modulus | | ASTM D-790 | 60000 kg/cm2 |
| elongation | | ASTM D-638 | 4 % |
| tensile strength | | ASTM D-638 | 950 kg/cm2 |
| tensile strength | | ASTM D638/ISO 527 | 950 kg/cm²(MPa)[Lb/in²] |
| Rockwell hardness | | ASTM D785 | 120 |
| Flexural modulus | | ASTM D790/ISO 178 | 6000 kg/cm²(MPa)[Lb/in²] |
| bending strength | | ASTM D790/ISO 178 | 1600 kg/cm²(MPa)[Lb/in²] |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric constant | | ASTM D-150 | 3 |
| | ASTM D-257 | 1.00×1016 Ω.cm |
| dielectric strength | | ASTM D-149 | 20 KV/mm |
| Surface Resistivity | | ASTM D257/IEC 60093 | 1E+16 Ω |
| dielectric constant | | ASTM D150/IEC 60250 | 3 |
| Physical properties | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792/ISO 1183 | 1.49 |
| Water absorption rate | | ASTM D570/ISO 62 | 0.07 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTM D-648 | 200 °C |
| flame resistance | | UL 94 | V0 |
| | ASTM D648/ISO 75 | 200 ℃（℉） |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices