PPS DIC.PPS CZ-1030 DIC Corporation

0
  • Properties:
    Filler
    carbon fiber reinforced material
    30%
    filler by weight

Technical Data Sheet

physical property Test ConditionTest MethodTest Result
Water absorption rateASTM D5700.080 %
Shrinkage rateASTM D9550.25 %
Shrinkage rateASTM D9551.1 %
densityASTM D7921.43 g/cm³
hardnessTest ConditionTest MethodTest Result
Rockwell hardnessM-ScaleASTM D785100
Rockwell hardnessR-ScaleASTM D785120
flammabilityTest ConditionTest MethodTest Result
UL flame retardant ratingUL 94V-0
Mechanical propertiesTest ConditionTest MethodTest Result
tensile strength ASTM D638115 MPa
elongationBreakASTM D6380.80 %
Flexural modulusASTM D7909000 MPa
bending strengthASTM D790170 MPa
compressive strengthASTM D695130 MPa
Tensile modulusASTM D63810000 MPa
Poisson's ratio0.36
coefficient of frictionSteel - DynamicASTM D18940.20
coefficient of frictionSteel - StaticASTM D18940.20
elongation at breakASTM D7901.2 %
Impact resistanceTest ConditionTest MethodTest Result
Suspended wall beam without notch impact strengthASTM D256220 J/m
Impact strength of cantilever beam gapASTM D25645 J/m
Electrical performanceTest ConditionTest MethodTest Result
Volume resistivityASTM D2571.0E+7到1.0E+8 ohms·cm
Thermal performanceTest ConditionTest MethodTest Result
Heat distortion temperatureASTM D648265 °C
Linear coefficient of thermal expansionASTM D6962E-05 cm/cm/°C
Linear coefficient of thermal expansionASTM D6962E-05 cm/cm/°C
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Contact Us

Get App

Top