PTFE LNP™ LUBRICOMP™ FL4530-NC SABIC INNOVATIVE US
82
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Shrinkage rate | MD | 内部方法 | 3.0 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Tensile modulus | ISO527-2/1 | 900 | Mpa | |
| tensile strength | 屈服 | ISO527-2/50 | 20.0 | Mpa |
| 断裂 | ISO527-2/50 | 12.0 | Mpa | |
| elongation | 屈服 | ISO527-2/50 | 9.0 | % |
| 断裂 | ISO527-2/50 | 12 | % | |
| Bending modulus | ISO178 | 700 | Mpa | |
| Bending stress 2, | ISO178 | 18.0 | Mpa | |
| Suspended wall beam gap impact strength | 23°C | ISO180/1A | 6.0 | kJ/m² |
| Unscented Izod Impact Strength | 23°C | ISO180/1U | 80 | kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Hot deformation temperature | 0.45MPa,未退火,64.0mm跨距 | ISO75-2/Bf | 63.0 | °C |
| 1.8MPa,未退火,64.0mm跨距 | ISO75-2/Af | 47.0 | °C | |
| Linear coefficient of thermal expansion | MD:23到60°C | ISO11359-2 | 1.4E-04 | cm/cm/°C |
| TD:23到60°C | ISO11359-2 | 1.2E-04 | cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top