PA6 BG-50S BK EMS-CHEMIE SWITZERLAND

Form：Granules | Grade：Injection grade

Properties:

Glass fiber reinforcedHigh impact resistanceFiller: Glass fiber reinf50% filler by weight

Typical Applications:

Home appliance componentsAutomotive interior partsElectrical applicationsAutomotive interior partsApplication in the automotive fieldHome appliance componentsElectrical/Electronic Applications

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Home appliance components \| Automotive interior parts \| Electrical applications \| Automotive interior parts \| Application in the automotive field \| Home appliance components \| Electrical/Electronic Applications
Properties:	Glass fiber reinforced \| High impact resistance \| Filler: Glass fiber reinf \| 50% filler by weight

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	23°C	kJ/m²	90
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	-30°C	kJ/m²	85
flammability	Test Condition	Test Method	Test Result	Test Unit
Flammability level	0.8mm		HB	--
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile strain	Break	%	3.0	6.0
tensile strength	Break		245	MPa
Tensile modulus		MPa	17500	11500
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	TD	cm/cm/°C	1E-04	--
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	MD	cm/cm/°C	1.5E-05	--
Melting temperature		°C	222	--
Continuous use temperature	--4	°C	160	--
Continuous use temperature	Continuous use temperature	--3	°C	90.0to140	--
Hot deformation temperature	8.0MPa,Unannealed	°C	170	--
Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed	°C	210	--
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	Equilibrium,23°C,50%RH	%	1.5	--
Water absorption rate	Water absorption rate	Saturation,23°C	%	5.0	--
Shrinkage rate	MD	%	0.10	--
Shrinkage rate	Shrinkage rate	TD	%	0.50	--
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Compared to the anti leakage trace index		V		--
Dielectric strength		kV/mm	40	37
Volume resistivity		ohms·cm	1E+14
Surface resistivity		ohms	--	1E+12
hardness	Test Condition	Test Method	Test Result	Test Unit
Ball Pressure Test		MPa	270	155

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top