ASA+PA SCHULABLEND® (ASA/PA) M/MW
0
- Properties:physical property
CompareTechnical Data Sheet
| Test Condition | Test Method | Test Result | |
|---|---|---|---|
| density | ISO 1183/A | 1.12 g/cm³ | |
| Melt volume flow rate | ISO 1133 | 15.0 cm³/10min | |
| Tensile modulus | ISO 527-2/1A/1 | 2000 MPa | |
| tensile strength | Yield | ISO 527-2/1A/50 | 55.0 MPa |
| Charpy Notched Impact Strength | ISO 179/1eA | 5.0 kJ/m² | |
| ISO 179/1eA | 15 kJ/m² | ||
| Impact strength of simply supported beam without notch | ISO 179/1eU | 77 kJ/m² | |
| ISO 179/1eU | NoBreak | ||
| Heat distortion temperature | ISO 75-2/Bf | 116 °C | |
| vicat | ISO 306/B50 | 142 °C | |
| burning rate | ISO 3795 | <100 mm/min | |
| UL flame retardant rating | IEC 60695-11-10,-20 | HB | |
| Tensile strain | Yield | ISO 527-2/1A/50 | 4.0 % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top