Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | IEC60811-1-3 | 1.35到1.41 g/cm³ |
| Color | | ME12 | -0.880到0.720 |
| Colorb | | ME12 | -1.59到0.0100 |
| Colorb | | ME12 | -1.59到0.0100 |
| ColorL | | ME12 | 27.9到29.5 |
| colour | | ME12 | OK |
| density | | IEC60811-1-3 | 1.35到1.41 g/cm³ |
| Color | | ME12 | -0.880到0.720 |
| ColorL | | ME12 | 27.9到29.5 |
| colour | | ME12 | OK |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | NBR7456 | 88到92 |
| | NBR7456 | 88到92 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| Limiting Oxygen Index | | NBR6245 | >30 % |
| Limiting Oxygen Index | | NBR6245 | >30 % |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Elongation | | IEC60811-1-2 | <25 % |
| Maximum Variables | | IEC60811-1-2 | <25 % |
| Elongation | | IEC60811-1-2 | <25 % |
| Maximum Variables | | IEC60811-1-2 | <25 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile stress | | IEC60811-1-1 | >12.6 MPa |
| Tensile strain | Yield | IEC60811-1-1 | >150 % |
| Tensile stress | | IEC60811-1-1 | >12.6 MPa |
| Tensile strain | Yield | IEC60811-1-1 | >150 % |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | IEC60811-1-2 | >12.6 MPa |
| elongation | Break | IEC60811-1-2 | >150 % |
| tensile strength | | IEC60811-1-2 | >12.6 MPa |
| elongation | Break | IEC60811-1-2 | >150 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTMD257 | >1.0E+14 ohms·cm |
| Volume resistivity | | ASTMD257 | >1.0E+14 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| brittle temperature | | ASTMD746 | <-17.0 °C |
| brittle temperature | | ASTMD746 | <-17.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare