PMMA ST15G7L Lucite (Taiwan)
0
- Properties:Has excellent toughness
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ISO 294-4 | 0.4-0.7 % | |
| Rockwell hardness | ISO 2039-2 | 84 |
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| refractive index | ISO 489 | 1.49 | |
| transmittance | ASTM D1003 | 91.5 % | |
| Haze ratio | ASTM D1003 | 1 % |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.18 g/cm | |
| melt mass-flow rate | ISO 1133 | 6.6 g/10min | |
| Water absorption rate | ISO 62 | 0.31 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| bending strength | ISO 178 | 100 MPa | |
| Charpy Notched Impact Strength | ISO 179/1eA | 2.3 KJ/m | |
| Impact strength of simply supported beam without notch | ISO 179/1eU | 22 KJ/m | |
| Impact strength of cantilever beam gap | ISO 180/1A | 2.1 KJ/m | |
| Tensile stress | ISO 527-2 | 74 MPa | |
| Tensile strain | ISO 527-2 | 7 % | |
| Flexural modulus | ISO 178 | 2800 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2A | 94 ℃ | |
| vicat | ISO 306A | 107 ℃ | |
| ISO 306B | 100 ℃ | ||
| Linear coefficient of thermal expansion | ASTM E831 | 0.00008 cm/cm/℃ | |
| UL flame retardant rating | UL 94 | HB | |
| GWIT | IEC 60695-2-13 | 650 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top